Recent Mold Remediation Posts

Mold Prevention

3/11/2019 (Permalink)

While there is no way to completely eliminate all of the molds and mold spores in your home, there are some steps you can take to control the amount of moisture and subsequent mold growth. While this isn’t an exhaustive list, the following are several ways to accomplish moisture control.

One way is to stop any water that could creep into your home. Fixing any leaks from appliances, pipes, or supply lines; using waterproof or water-resistant materials such as tiles, deep-sealed concrete, galvanized/stainless steel hardware, etc.; using moisture barriers over exposed dirt and having proper ventilation in crawl spaces to prevent water from the ground; and making sure gutters are properly cleaned and maintained are ways to prevent unwanted water from invading your home. Keeping this water out is key to preventing microbial growth.

Another is to keep it clean. Fabrics that are not cleaned regularly and kept in well ventilated places will breed mildew. Mold and mildew thrives in soiled, damp places. Dirty duct work can cause mold spores to circulate throughout your home without you really noticing.

The next thing to remember is to keep it dry. Using dehumidifiers, fans, and opening windows, especially during hot weather, to regulate the humidity levels in your home help inhibit the ability of mold to grow. It is ideal to keep humidity levels below 40% and reduce potential for condensation on cold surfaces by insulating around them.

Disinfecting surfaces regularly can prevent microbial growth from occurring or returning. A 10% bleach solution – 1 ¼ - 1 ½ cup bleach to a gallon of water – or a commercial disinfectant is recommended by FEMA to be most effective in removing/preventing microbial growth.

If you do find yourself with mold in your home, trust a certified professional, like SERVPRO of Conyers/Covington, to remove it properly.

*information courtesy of FEMA Mold & Mildew Guide

Mold Remediation Process

3/8/2019 (Permalink)

Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our “typical” process:

  1. Emergency Contact - (770) 483-1212

The mold cleanup and restoration process begins when you call us. Our representative will ask a series of questions to help us determine the necessary equipment, resources, and personnel.

  1. Inspection and Mold Damage Assessment

We carefully inspect your property for visible signs of mold. Mold feeds on cellulose and water and can be hidden from plain view. We use various technologies to detect mold and hidden water sources.

  1. Mold Containment

Our professionals use various containment procedures to prevent the spread of mold. We may use advanced containment procedures like negative air chambers to isolate the contaminated area with physical barriers and negative air pressure to keep the mold spores from spreading during the cleanup process. All fans and heating and cooling systems will be turned off to prevent the spread of mold.

  1. Air Filtration

Our specialized filtration equipment allows our Professionals to capture microscopic mold spores out of the air. We utilize powerful “air scrubbers” and HEPA vacuums to prevent the spread of these mold spores while the mold remediation is in process.

  1. Removing Mold and Mold-Infested Materials

The mold remediation process depends on the amount of mold growth and the types of surfaces on which the mold appears. We’ll use antifungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. It may be necessary to remove and dispose of mold-infested porous materials, like drywall and carpeting, to remediate heavy mold growth.

  1. Cleaning Contents and Belongings

We clean your furniture, decorative items, curtains, clothing, and other restorable items affected by mold. We use a variety of cleaning techniques to clean and disinfect your belongings. We’re also trained to remove odors and deodorization using fogging equipment.

  1. Restoration

Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business. The restoration step gets your home or business back to normal.

Trust the professionals at SERVPRO of Conyers/Covington to help with any mold remediation needs.

https://www.SERVPROconyerscovington.com/mold-removal-process

Follow These Mold Safety Tips if You Suspect Mold

2/13/2019 (Permalink)

If you see visible mold, do not disturb it. You can inadvertently spread the mold infestation throughout your home. When mold is disturbed, the mold can release microscopic mold spores which become airborne and can circulate inside your home.

What to Do:

  • Stay out of affected areas.
  • Turn off the HVAC system and fans.
  • Contact SERVPRO of Conyers/Covington for mold remediation services.

What Not to Do:

  • Don’t touch or disturb the mold.
  • Don’t blow air across any surfaces with visible or suspected mold growth.
  • Don’t attempt to dry the area yourself.
  • Don’t spray bleach or other disinfectants on the mold.

About Our Mold Remediation Services

SERVPRO of Conyers/Covington specializes in mold cleanup and restoration, in fact, it’s a cornerstone of our business.  Our crews are highly trained restoration professionals that use specialized equipment and techniques to properly remediate your mold problem quickly and safely.

If You See Signs of Mold, Call Us Today – 770-483-1212

Managing Mold

6/17/2018 (Permalink)

When there’s a water intrusion, like a roof leak or leaking water line, mold can quickly become a problem in your home or business. Mold can cause health effects and can also cause significant damage to your property. Fortunately, SERVPRO® of Conyers/Covington has the training, protective gear, and specialized equipment necessary to handle your mold problem. Although every mold damage scenario is different requiring a unique solution, the general mold remediation process stays the same. The following steps illustrate a “typical” mold removal process.

Call the Team in Green

The mold cleanup and restoration process begins when you call SERVPRO® of Conyers/Covington. A representative will ask a series of questions to help determine the necessary equipment, resources, and personnel needed.

Inspection and Damage Assessment

Your property will be carefully inspected for signs of mold using technology designed to detect mold and hidden water sources. Mold feeds on cellulose and water and can be hidden from plain view.

Mold Containment

Various containment procedures will be placed to prevent the spread of mold and isolate the contaminated area with physical barriers and negative air pressure to keep the mold spores from spreading during the cleanup process.

Air Filtration

Specialized filtration equipment captures microscopic mold spores out of the air. SERVPRO® technicians utilize powerful air scrubbers and HEPA vacuums to prevent the spread of these mold spores while the mold remediation is in progress.

Removing Mold and Mold-Infested Materials

The mold remediation process depends on the amount of mold growth and the types of surfaces on which the mold appears. Antifungal and antimicrobial treatments will be used to eliminate mold colonies and help prevent new colonies from forming. Removing and disposing of mold-infested porous materials, like drywall and flooring, may be necessary to remediate heavy mold growth.

Cleaning Contents and Belongings

SERVPRO® of Conyers/Covington professionals clean your furniture, decorative items, curtains, and other restorable items affected by mold. They use a variety of cleaning techniques to clean and sanitize your belongings. They are also trained to remove odors and deodorize using fogging equipment.

Restoration

Depending on the level of mold damage, drywall, subfloors, and other building materials may be removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business.

SERVPRO® of Conyers/Covington understands mold and mold growth and has the training and equipment to remediate mold in your home or business.

*Courtesy of Restoration Newsline Vol 29, Iss 6